Fewer Joints, Less Labor: Western Tube's 20' EMT and Time-Saving Line


Ask an electrician where the hours go on a long conduit run and the answer usually comes back to the joints. Every coupling is a part to buy, a part to stage and a connection to make on a lift. Western Tube has built a line of products around taking joints out of the job, and it has published the numbers to back it.
Half the sticks, fewer than half the connections
Western Tube's 20' EMT flyer compares the same installation two ways. In 10' EMT it takes 50 sections and 45 connections. In 20' EMT it takes 25 sections and 20 connections. Western Tube says that reduces coupling costs and installation time by at least 50 percent compared to traditional 10' lengths.
20' EMT comes in trade sizes 1/2 through 4, made from the same low-carbon strip steel as Western Tube's 10' EMT, in-line galvanized, with a low-friction interior coating for easier wire pulls. It meets UL 797, ANSI C80.3 and NEC Article 358. Western Tube recommends it for warehouses, data centers, big-box retail, airports and other long runs.
Take the coupling off the job list
The connections that remain can go faster too. Western Tube publishes per-connection times for its pre-coupled products, based on a $100-per-hour labor rate:
SmartSet EMT has an engineered steel set screw coupling on one end, so there is no separate coupling to buy, stock or install. Western Tube puts a standard set screw connection at about 55 seconds ($15.30 per 100 feet) and a SmartSet connection at about 10 ($2.78 per 100 feet), a savings of $12.52 per 100 feet. It comes in trade sizes 1-1/4 through 4, in 10' and 20' lengths; Western Tube notes that 20' SmartSet is a special order with minimum quantities.
SpeedCouple puts a pre-installed swivel coupling on rigid conduit (trade sizes 2 through 6) and IMC (2 through 4). Turn the coupling, not the conduit. Western Tube puts a standard coupling at about 80 seconds and SpeedCouple at about 10, a savings of $19.54 per 100 feet, and says it can cut coupling material cost by as much as 50 percent.
SmartCompression EMT arrives with the compression fitting already installed.
Color EMT and conduit speeds identification on jobs that separate systems by color.
Combine 20' lengths with a built-in coupling and the savings stack: fewer joints, and less time on each one.
Plan the delivery
Western Tube notes that 20' EMT requires special delivery and handling. Bring it up early in the job so the material arrives in a way the site can receive and stage it.
Talk to your Electra Sales representative
To price 20' EMT or Western Tube's time-saving line for your next long-run project, contact your Electra Sales representative.





Comments